how can I config syslog/traffic log directly from data plane ?
some config example ?

tks

Date: Fri, 13 Dec 2013 14:51:58 +0300
Subject: Re: [j-nsp] SRX monitor-interface question
From: asadgard...@gmail.com
To: dim0...@hotmail.com
CC: fahad.k...@gmail.com; juniper-nsp@puck.nether.net

Its not recommended to use control plane for traffic logs, you can configure 
sex to forward traffic logs directly from data plane
RG0 aka control plane controls your rotuing engine, routing protocols and 
chassis. Failing it over will cause your routing daemon to restart , routing 
protocols to reconverge and so on...

Asad

On Friday, December 13, 2013, R S  wrote:
And what about syslog or firewall traffic logging flows on the RG1 Active node 
if RG0 remain active on the Passive ?




Date: Fri, 13 Dec 2013 16:34:53 +0500

Subject: Re: [j-nsp] SRX monitor-interface question

From: fahad.k...@gmail.com

To: dim0...@hotmail.com

CC: juniper-nsp@puck.nether.net



RG0 only contains Control Plane or REs.

In SRX failover, its not necessary to failover RG0 when there is a failover in 
RG1 due to a link failure. So we only do interface-monitor in RG1, RG2 ... not 
in RG0. RG0 already run in A/P mode.





It can be possible that SRX B is Primary in RG0 while Secondary in RG1 (means 
SRX A is Primary in RG 1)

Muhammad Fahad Khan

JNCIE-M # 756

Lead Network and Security Consultant - IBM



+92-301-8247638

Skype: fahad-ibm

http://pk.linkedin.com/in/muhammadfahadkhan





On Fri, Dec 13, 2013 at 2:07 PM, R S <dim0...@hotmail.com> wrote:











Hi







In an SRX5800 cluster



A/P deployment, does anybody recommend to monitor-interface also on RG0 or not



?







PRO ? CONS ?















We did it but



unfortunately during an SPU crash the RG0 didn’t switch properly and JTAC told 
us it’s



not recommended monitor-interface under RG0 in same corner case…















Any experience to share



is useful















Tks











_______________________________________________



juniper-nsp mailing list juniper-nsp@puck.nether.net



https://puck.nether.net/mailman/listinfo/juniper-nsp







_______________________________________________

juniper-nsp mailing list juniper-nsp@puck.nether.net

https://puck.nether.net/mailman/listinfo/juniper-nsp

                                          
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to