But the RPM is not supported in SRX high-end series, so I think the script must has the capability to probe the servers IPs as well.
Any one has a script for the same idea and requirement! Regards ________________________________ From: mahmoud yasin <eng_mahmoo...@yahoo.com> To: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Wednesday, February 19, 2014 4:54 PM Subject: [j-nsp] ECMP in Virtual Router and IP-Track Hi I have SRX5800 and want to load balance traffic per flow (will use 12.1) between two proxy servers, the two servers are inside a virtual router and they are not directly connected to the firewall. Concerns; 1- Is it supported to apply ECMP in VR; since the forwarding-table (in which the loading policy will be applied) is part of inet.0? 2- I think IP-Track is not supported yet for high end SRX and even in version 12.1, but its needed in my case since the two servers are not directly connected, so the static routes will remain active if the servers goes down. Is there a way to prope the links else than the scripts? if not, then any comments about scripts? Mytel _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
