Hi Abdullah, Unfortunaly ... yes.. :( Had to send it for RMA (EX is lifetime support....with J-Care even fast!)
Brgds, Maarten -----Oorspronkelijk bericht----- Van: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] Namens Abdullah Baheer Verzonden: maandag 24 februari 2014 12:29 Aan: juniper-nsp@puck.nether.net Onderwerp: [j-nsp] EX switch corrupt and stuck in u-loader Hi I have an ex switch which got corrupt due to abrupt power off and i tried to recover it from USB flash drive. Normally the switch would be showing "junos loader' on the switch when it is corrupt. The problem is now the switch is showing "u-loader" and when i reboot it, it only shows around five messages on the console and gets stuck at "usb:" This happens weather or not I have a USB flash drive connected. This output is all i see on my console: U-Boot 1.1.6 (Feb 6 2008 - 11:27:42) Board: EX3200-48POE 2.23 EPLD: Version 6.0 (0x85) DRAM: Initializing (512 MB) FLASH: 8 MB USB: Has anybody seen this before? Thanks Abdullah _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp