I seem to recall reading that at least on the 4300 ELS, spanning-tree is now no longer implicitly enabled on every port, so disable is no longer required because it is the default state unless you have explicitly referenced the interface.
Would love to confirm this with someone who has access to either 4300, 9200 or QFX5100 in front of them Ben > On 9 Mar 2014, at 1:49 am, "Chuck Anderson" <c...@wpi.edu> wrote: > > Here is another Enhanced Layer 2 Software question. Is it possible to > disable STP participation on a port? The "disable" command seems to > be missing from these hierarchies, at least on 13.2X51 for QFX5100: > > protocols stp interface <> disable > protocols rstp interface <> disable > protocols mstp interface <> disable > protocols vstp interface <> disable > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
