Hi! I'm trying 6PE, I don't have that much useful config to show yet :(
Johan On Thu, Apr 3, 2014 at 11:25 PM, Diogo Montagner <diogo.montag...@gmail.com>wrote: > Hi Johan, > > Are trying to do 6PE or 6VPE ? > > Would be helpfull if you share the relevant configuration you have applied > on your routers. > > If you are trying to 6VPE, you will need the family inet6-vpn too on the > MP-iBGP. > > Thanks > > > On Friday, 4 April 2014, Johan Borch <johan.bo...@gmail.com> wrote: > >> Hi! >> >> I'm trying to tunnel ipv6 over mpls ipv4 core using the ipv6-tunneling >> knob, following this document: >> >> http://www.juniper.net/techpubs/en_US/junos13.1/topics/example/mpls-tunneling-ipv6-over-mpls-ipv4.html >> >> I'm not finding that document that helpfull and can't get it to work. >> family ipv6 is enabled on all interfaces and ipv6-tunneling on protocol >> mpls. But in this case the customer is directly connected to the PE and >> have a vrf/l3vpn there, do I still need the whole inet6 ebgp stuff? >> >> Regards >> Johan >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > > -- > ./diogo -montagner > JNCIE-SP 0x41A > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp