Use your loopback and put that in a reth. Thanks, Morgan
On Mon, May 5, 2014 at 3:23 PM, Andy Litzinger < andy.litzinger.li...@gmail.com> wrote: > Hi All, > Two related questions. I have a pair of SRX 3400s in an Active/Passive > cluster. They rely on an external gateway for internet access (i.e. my > ISPs don't terminate on the SRXs). I am setting up redundant tunnels to an > AWS VPC. Amazon has an example for J-Series ( > http://docs.aws.amazon.com/AmazonVPC/latest/NetworkAdminGuide/Juniper.html > ), > but I don't think it's for a cluster set-up. > > Here are my questions: > > 1 - If I want to set up a redundant secure tunnel interface (e.g. st0), > should i bind it to an reth interface? > > 2 - Has anyone connected an Active/Passive SRX cluster to an AWS VPC? Any > tips or tricks you care to share? > > regards, > -andy > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp