Recently had a similar issue, had to use the primary external IP as HUB ip. Double check the recommended JunOS version on the cluster. I dont think 12 is recommended.
//Mattias On Thu, May 8, 2014 at 10:04 PM, Levi Pederson < levipeder...@mankatonetworks.net> wrote: > Greetings, > > I've created several VPNs with little or no trouble in the past. Between > both Cisco and Juniper devices. But I am a little stumped by I cannot > connect a simple (Static IP) IPSec Tunnel between an SRX240 Cluster and a > single srx210. I've checked the policies and the proposals and they are > spot on identical. I've put the external interface on the cluster (lo0.0) > on the right external zone. I'm also running OS 12.1.X44.D30 which > supports. I've been reading several diatribes on how to place the loopback > into the redundancy and I have done that as well. I'm still gathering the > configurations for perusal as they need to be secured. First question > would be, does anything instantly pop out to anyone? I'll have the configs > loaded as soon as I can. > > Thank you, > *Levi Pederson* > Mankato Networks LLC > cell | 612.481.0769 > work | 612.787.7392 > levipeder...@mankatonetworks.net > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- *Med Vänliga Hälsningar / Best Regards* *Mattias Gyllenvarg* _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp