Just use the command with 'vlan 1-10' http://www.juniper.net/techpubs/en_US/junos14.1/topics/reference/configuration-statement/vlan-edit-protocols-mstp.html
Kind regards, Peter > Op 22 jul. 2014 om 05:22 heeft Victor Sudakov <[email protected]> het > volgende geschreven: > > Colleagues, > > I have now the following configuration: > > admin@sw-km270# show protocols mstp msti 2 > vlan [ management ENERGY NATEKS PASOLINK-Management MNCS ITSO ]; > > How do I replace the explicit list of vlans with a range like > 10....500 ? What's the configuration command syntax? > > I suppose it's a general Junos syntax question (using ranges of > values) but somehow I cannot find the obvious. Thanks a lot for helping. > > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:[email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
