Hi Nc, >From the release notes:
. Integrated user firewall [SRX Series]-This feature retrieves user-to-IP address mappings from the Windows Active Directory to use as match criteria in firewall policies. The SRX Series device polls the event log of the Active Directory Controller (ADC) to determine who has logged on. The username and group are queried from the LDAP service in the ADC. The SRX Series device uses the IP address, username, and group information to generate authentication entries that the UserFW module uses to enforce user-based and group-based policy control over traffic. Best regards, Maarten -----Oorspronkelijk bericht----- Van: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] Namens Nc Aji Verzonden: dinsdag 9 september 2014 16:21 Aan: juniper-nsp@puck.nether.net Onderwerp: [j-nsp] User Role Firewall in SRX Does the Juniper SRX with Latest version 12.1x47 Support User Firewall roles without using MAG. I wasn't able to see that in the release notes also in the feature explorer. Thank you all.. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp