You may be referring to a question I had about ECMP a few months ago. In my case, I was sent to this link which was very helpful. You're right, it is way more involved than it should be.
http://www.junosandme.net/article-junos-load-balancing-part-3-troubleshooting-109382234.html Regards, John On Wed, Oct 1, 2014 at 8:29 AM, Daniel Rohan <dro...@gmail.com> wrote: > Hi all, > > I seem to remember a great thread where someone asked how to identify which > interface from a LAG or LACP group a flow would take or is taking based > upon the tupple. IIRC, the answer provided was involved and included some > hidden pfe execute commands, but I could be wrong. In any case, I can't > find the thread. > > Does anyone know how to do this? > > Thanks, > > Dan > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp