Hi all. We have 2x EX4550's in VC that provide switching for an iSCSI network. There are 3 Dell SANs and 4 Dell R820 ESXi hosts connected via twinax @ 10Gbps. Jumbo frames and flow control is enabled.
My knowledge around Juniper tech is a little vague, but what's with the default CoS settings on the switch? It seems they will automatically reserve 5% for network control traffic. Is there anyway to disable CoS entirely? AFAIK Brocade & Cisco don't have this type of default, and 5% of a 10Gbps is actually a rather significant chunk of bandwidth. The reason I'm asking is that we've seen some performance issues lately. We have a hybrid-SSD tray of storage that can saturate a link, so we're seeing MAC pause frames being received by the switch as well as discards on some of the queues. Thanks for any pointers. Regards, Josh. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp