P eople, We have a simple environment where we need to configure q-in-q using QFX5100 boxes:
T T T QFX5100(A) ---- QFX5100(B)------QFX5100(C) ----- QFX5100(D) T = trunk (interface-mode) 802.1Q A and D elements need to push and pop C-VLANS. C-VLANs on this simple case are: list between [2500-2600] S-VLAN would be vlan-id 2000 We have configured the following: giuliano@CORE-SW-A# show interfaces ge-0/0/23 flexible-vlan-tagging; encapsulation extended-vlan-bridge; unit 2000 { vlan-id-list 2500-2600; input-vlan-map push; output-vlan-map pop; } set vlans S-VLAN interfaces ge-0/0/23.2000 <---- here is not possible to configure vlan-id 2000 No problem until now. But the question now is ... How can we transport the S-VLAN to a trunk port with familiy ethernet-swtiching ? Is it possible ? We need to create another vlan with vlan-id 2000 ? set vlans V2000 vlan-id 2000 set interfaces xe-0/0/0 unit 0 family ethernet-switching interface-mode trunk vlan-members V2000 It will work in this environment ? Anyone had tested it with the last recommended release ? 13.2X51-D26 It works ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp