Hi Team, Has anyone has experience deploying dual-stack services on Juniper BRAS?
Our requirement is per below. For example, the bandwidth package is 5Mbps. The IPv4 & IPv6 should be policed jointly to bandwidth of 5Mbps rather than individual IPv4 or IPv6 family policing. If policing is done individually for IPv4 (5Mbps) and for IPv6 (5Mbps), the user is getting bandwidth of 10Mbps jointly which we tried to avoid. We would like to ask our experts on how to implement joint policing for IPv4/IPv6 dual stack and the relevant RADIUS attributes we should use in case we want to trigger the policing filter from the RADIUS. Our current sample of script with individual IPv4 and IPv6 family policing. dynamic-profiles { VLAN-PPPOE-PROFILE { interfaces { "$junos-interface-ifd-name" { unit "$junos-interface-unit" { encapsulation ppp-over-ether; vlan-id "$junos-vlan-id"; pppoe-underlying-options { dynamic-profile PPPOE-IP-PROFILE; } } } } } PPPOE-IP-PROFILE { interfaces { pp0 { unit "$junos-interface-unit" { ppp-options { pap; } pppoe-options { underlying-interface "$junos-underlying-interface"; server; } family inet { filter { input 5m; output 5m; } unnumbered-address "$junos-loopback-interface"; } family inet6 { filter { input 5m-v6; output 5m-v6; } unnumbered-address "$junos-loopback-interface"; } } } } } Advises much appreciated ! Rgds Darren Liu _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp