Hi Levi, Your interface can be vlan tagged or ethernet-switching modes not both. The bridge family is for transparent mode only.
I would either terminate the vlan on this interface tagged or convert it to ethernet-switching and setup L3 vlan interfaces for all vlans. Without your design/reasons for doing this I can't comment more. Cheers Michael Gehrmann Hosting Support Specialist - Networks Macquarie Telecom -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Levi Pederson Sent: Saturday, 22 November 2014 3:59 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] SRX Layer 2 Bridge All, I'm in a bit of a quandry. I need to land a vlan on a Tagged interface and then have it processed by the l3 vlan interface. I currently have 5 different tags landing on that interface and would like to add another. Has anyone accomplished this. All the internet has given me is the use of the "family bridge" and that is being rejected as there is an "inet" statement (on another Logical interface) in existence. Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 levipeder...@mankatonetworks.net _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp