"show system boot-messages" == "file show /var/run/dmesg.boot"
where /etc/rc says: # Keep a copy of the boot messages around dmesg > /var/run/dmesg.boot Thanks, Phil Scott Granados writes: >Can't you execute the dmesg command from the shell and watch the output there? > >On Jan 20, 2015, at 1:38 PM, Saku Ytti <s...@ytti.fi> wrote: > >> On (2015-01-20 11:26 +0000), Adam Vitkovsky wrote: >> >> Hey Adam, >> >>> I assume the cmd "show system boot-messages" shows just the Junos booting >>> process >>> Is there a way to see the whole boot dumps- you know HW booting >>> (MPCs/PEMs/SCBs/REs) >-or is that even recorded somewhere please? >> >> You need to observe console port during boot to see all. For MPC connect to >> them 'start shell pfe direct fpcX' before booting. >> >> -- >> ++ytti >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp