People, We have a router (MX960) with the following MPC4E board (with SCBE2):
http://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mpc4e-2x100ge-8x10ge.html We are using it configured as aggregated ethernet AE3 (with LACP) connecting to a CISCO ASR9000 router (minimum-links 1 and link-speed 100g with MTU 9192) using flexible-vlan-tagging and 2 vlans (unit 100 and unit 200). I have found some specific documents about running this board on a special way called SA-MULTICAST. http://www.juniper.net/techpubs/en_US/junos14.2/topics/task/configuration/interfaces-mpc4e-100-ge-interop-sa-multicast.html My question is ... there is some special way to configure this board to talk with CISCO ASR9000 board ? Does cisco needs this king of configuration on juniper to work ? Something like 2 aggregated of 50 Gbps interfaces ? et-4/0/1:0 et-4/0/1:1 Do you have something similar in your backbones ? Its necessary to do some special config or adjustment ? There is some MAC-LEARNING limit configured by default on this board ? Could you please help me how to find the correct way to put it to work ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp