Hi Scott, There are two ways how you can setup the E-lines using BGP. BGP Auto Discovery with LDP signalling. BGP Auto Discovery with BGP signalling.
I think the second one is what you want to accomplish. adam > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > Of Scott Harvanek > Sent: 18 February 2015 17:00 > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] L2Circuit with BGP/LDP > > Hey all- > > I've got a question about a L2Circuit, normally we use LDP/OSPF, the > loopback of the neighbor is reachable as the OSPF route for that /32 is > available in the internal LDP route table. BGP routes are not imported > into this table, my question is, is there a way to have a /32 received > over BGP known by LDP and all other routes excluded? We have a situation > where OSPF is less desirable and I'd rather not setup a routing-instance > to do full BGP signalling for this if we don't have to. > > -- > Scott H. > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp --------------------------------------------------------------------------------------- This email has been scanned for email related threats and delivered safely by Mimecast. For more information please visit http://www.mimecast.com --------------------------------------------------------------------------------------- _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp