Hi Thanks, that will be hard to implement live i guess ;)
The routes that I want to install is all remotely learned, no local. Johan On Thu, Mar 5, 2015 at 9:40 PM, Harry Reynolds <ha...@juniper.net> wrote: > You might try as-path-loops = 2 under main instance routing-options. As > displayed it seems the box has detected its own AS and hidden due to a > loop. Note this is a global setting and may reset connections/have > repercussions if real loops exist. Use with some thought. > > Also, consider rib groups (or the simplified form known as auto-export) if > you want to leak between vrfs. Below is typically more for installing a > remotely learned route from the bgp.l3vpn table into multiple vrfs. > > > Regards > > > > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > Of Johan Borch > Sent: Thursday, March 05, 2015 12:20 PM > To: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] MPLS/vrf-import > > Hi again > > I really don't get this :) > > What I'm trying to do is to merge routes from one vrf into another. I have > create this simple vrf-import policy > > term TEST { > > from { > > protocol bgp; > > community [ VRFONE VRFTWO ]; > > } > > then accept; > > } > > term Default { > > then reject; > > } > > > When I look at the routes that gets imported from VRFTWO it says: > > Next hop: 1.1.1.1 via xe-1/2/3.0 weight 0x1, selected > > State: <Secondary Hidden Int Ext> > > Local AS: 65534 Peer AS: 65534 > > AS path: 65534 I (Looped: 65534) > > What am I missing here? :) > > Johan > > On Thu, Mar 5, 2015 at 11:29 AM, Johan Borch <johan.bo...@gmail.com> > wrote: > > > Hi! > > > > I have a MPLS network that uses for example ASN65534 for BGP > > connecting the PE's. On these I have a VRF XYZ with target 65534:1. It > > all works but now I have to import another target into VRF XYZ with AS > > 65533 and here the problem starts. > > > > looking at the routes in VRF XYZ i can see that my the routes from > > target > > 65533:1 gets imported as hidden with reason Looped. It's hard to > > change the AS-numbers and I see that It should probably not have used > > the same AS-number for both BGP and for the VRF, is there anyway around > this? > > > > Regards > > Johan > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp