We have a situation here and we find a way ... We connect 2 interfaces in a optical cable loop ... One that came from a trunk interface ... Family ethernet-switching and other family mpls with L2-circuit to do a vlan traffic to enter in a mpls interface
Sent from my iPhone > On Mar 6, 2015, at 17:51, Levi Pederson <levipeder...@mankatonetworks.net> > wrote: > > All, > > I've got a simple MPLS setup with 4 EX4550's. > > They are currently in an incomplete ring but will soon have a full ring > situation. > > I've currently got 3 circuits on the transport working wonderfully. > However I'm trying to add another alas I'm a bit confused as how to proceed. > > Previous other circuits were easier in the fact they were simply saying the > port on MPLS1-1 is equivalent to this port on MPLS 3-1. > > The new circuit is different in that I have to take a VLAN recieved on a > trunk port and send it through the MPLS network to 3-1 and then into a > vlan-tagged MX-10. > > I was wondering if anyone has attempted this and has any pointers. > > Thank you, > > *Levi Pederson* > Mankato Networks LLC > cell | 612.481.0769 > work | 612.787.7392 > levipeder...@mankatonetworks.net > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp