Paul,
I am getting the same thing as you.
coresw1# show interfaces ge-1/0/30
vlan-tagging;
unit 10 {
vlan-id 10;
family inet {
address 172.16.10.1/24;
}
}
unit 20 {
vlan-id 20;
family inet {
address 172.16.20.1/24;
}
}
coresw1# show | compare
[edit protocols]
+ sflow {
+ interfaces ge-1/0/30.10;
+ interfaces ge-1/0/30.20;
+ }
coresw1# commit check
[edit protocols sflow]
'interfaces ge-1/0/30.10'
sFlow can only be run on .0 interfaces
error: configuration check-out failed
Mike Gonnason
On Thu, Mar 19, 2015 at 11:56 AM, Mike Gonnason <gonna...@gmail.com> wrote:
> Hi Paul,
>
> I am just setting up a pair of EX4300 in a VC on 13.2X51-D30.4. Let me
> attempt the config and see what happens.
>
> Mike Gonnason
>
> On Thu, Mar 19, 2015 at 6:47 AM, Paul S. <cont...@winterei.se> wrote:
>
>> Nobody ran into this one?
>>
>> Weird.
>>
>>
>> On 3/16/2015 午後 10:40, Paul S. wrote:
>>
>>> Hi,
>>>
>>> In the past, I used to deploy similar configs on non-ELS switches, and
>>> they mostly worked just fine with sflow.
>>>
>>> sw# show interfaces xe-0/2/0
>>> ether-options {
>>> 802.3ad ae1;
>>> }
>>>
>>> {master:0}[edit]
>>> sw# show interfaces ae1
>>> description "Trunked to <>";
>>> vlan-tagging;
>>> aggregated-ether-options {
>>> minimum-links 1;
>>> link-speed 10g;
>>> }
>>> unit 20 {
>>> vlan-id 20;
>>> family inet {
>>> address <>;
>>>
>>> }
>>> family inet6 {
>>> address <>;
>>>
>>> }
>>> }
>>>
>>> {master:0}[edit]
>>>
>>> Nothing but a port that's been trunked through another L2 switch.
>>>
>>> You could turn on sflow for this using `set protocols sflow interface
>>> xe-0/2/0.20` and that would be the end of it.
>>>
>>> Now though, it says that enabling sflow on any other unit than 0 is "not
>>> allowed."
>>>
>>> [edit protocols sflow]
>>> 'interfaces xe-0/2/0.20'
>>> sFlow can only be run on .0 interfaces
>>> error: configuration check-out failed
>>>
>>> I'm running the Juniper recommended version of code on this one.
>>>
>>> Model: ex4300-48t
>>> JUNOS EX Software Suite [13.2X51-D30.4]
>>>
>>> Having it on unit 0 produces no sflow datagrams (as expected, to be
>>> honest)
>>>
>>> Collector Udp-port No. of samples
>>> address
>>> 10.100.10.100 6343 0
>>>
>>> What are my options to make this switch work with the current way it is
>>> set up, and have sflow exporting enabled?
>>>
>>> Thanks for reading!
>>>
>>>
>>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
