Hello, A customer with two connections to my mx240. I want to police their total bandwidth to 800mbps. Right now I have a 800mbps policer but that gives them 800mbps on each circuit.
Customer Interface 1 is a VLAN on a 10G interface Customer Interface 2 is a VLAN on a 1G interface Each interface has its own /30 IP subnet with a BGP session on each customer IP Customer buys X bandwidth we want to give them X bandwidth over a pair of circuits. If one circuit goes down the policer needs to be set to the X bandwidth the purchased. Thanks -Matt -- Matthew S. Crocker President Crocker Communications, Inc. PO BOX 710 Greenfield, MA 01302-0710 E: matt...@crocker.com P: (413) 746-2760 F: (413) 746-3704 W: http://www.crocker.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
