MX104 is not supported in 12.3, it's that simple (13.2 minimum). And about features, MX104 is on par with other MX only in 13.3 anyway.
Not very different on newer PTX chassis. > Le 30 avr. 2015 à 08:18, Mark Tinka <mark.ti...@seacom.mu> a écrit : > > On 29/Apr/15 18:58, Colton Conor wrote: >> >> I notice that the Juniper JTAC recommends Junos 13.3R4.6 for the MX104 and >> PTX series? If Junos 13.3R4.6 is stable enough to run on these platforms, >> then I assume its stable enough to run on the other MX platforms, the MX80 >> to be specific? > > The MX104 and PTX are newer than the MX80/240/480/960, so the oldest > (read: most stable) code JTAC will recommend will be much newer compared > to what is recommended for the other platforms. > > Mark. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
