Hi Mahmoud, On 3 May 2015, at 10:27 pm, M Abdeljawad via juniper-nsp <juniper-nsp@puck.nether.net> wrote:
> Hi > I have two SRX Cluster, and the design requires that the traffic pass through > the fabric-link.but noticed some drop on the traffic when traffic pass > through the fabric link. > Is there a limitation for passing traffic over fabric link (the passing > traffic size was around 500M, and the fabric link is 10G) > RegardsMahmoud > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp If you're deliberately running a Z-mode traffic (and even if you're not) you need to check that you've set the MTU on the physical interfaces of the fabric link to be large enough to take the biggest frame you would receive on your reth/revenue interfaces plus overhead. The recommended/max values are 8900 for reth/revenue ports and 9014 for the fabric link. Reference Guide: http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/NT260/SRX_HA_Deployment_Guide.pdf Cheers, Ben _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp