Thanks Masood, This seems to be version specific and it is a bug on 11.4R7.5 (on MX5 I tested to be specific)
On 12.3R8.7 I do not encounter this problem. The queue that (one hop) BFD is put on can be changed with "host-outbound-traffic" command (but still cannot be changed with lo0 firewall outbound filter). Thanks again, Huan > On 15 May 2015, at 11:48 am, Masood Ahmad Shah <masoodn...@gmail.com> wrote: > > AFAIK host-outbound configuration or lo0 output filter will NOT influence the > PFE generated traffic. Only the output interface filter can match the PFE > generated traffic. > > Cheers, > Masood > >> On Fri, May 15, 2015 at 10:22 AM, Huan Pham <drie.huanp...@gmail.com> wrote: >> Hi list, >> >> I've tested in the lab and confirm that distributed PPM (e.g. one hop BFD) >> and LACP on MX does not honour host-outbound-traffic class of service nor >> outbound RE-reclassificaiton filter. This traffic always gets into queue 3. >> Depending on your design, this behaviour could be a problem, especially if >> your queue 3 is not designed for critical traffic. >> Is is a bug? Is there any way to move this control traffic to a different >> queue? >> >> Thanks very much in advance. >> >> Huan >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp