Again the issue occurs. Finding the flowd_hm process is high and router is consuming lot of memory.
rt@FAZJ2320R-1> show system processes extensive last pid: 2625; load averages: 0.19, 0.18, 0.17 up 0+06:20:14 20:08:08 123 processes: 4 running, 102 sleeping, 17 waiting Mem: 222M Active, 96M Inact, 570M Wired, 72M Cache, 69M Buf, 32M Free Swap: PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 11 root 1 171 52 0K 12K RUN 254:41 83.11% idle 1183 root 1 103 0 638M 459M RUN 88:05 12.99% flowd_hm 1201 root 1 4 0 101M 81228K kqread 17:34 0.05% rpd 12 root 1 -40 -159 0K 12K WAIT 2:17 0.00% swi2: net 13 root 1 -20 -139 0K 12K RUN 2:13 0.00% swi7: clock sio 931 root 1 96 0 4680K 2876K select 1:53 0.00% eventd Running junos 11.4R10.3. Warm Regards, Thiyagarajan B On Tue, Jul 15, 2014 at 8:13 PM, thiyagarajan b <bn.thiyagara...@gmail.com> wrote: > Hi Abhi, Junos upgrade was done two weeks back and now suddenly it > throws,error like this. Moreover I have upgraded the RAM to 1G before > upgrading. > I have lost the access, I would check the command output and respond. > > > Warm regards, > Thiyagarajan B. > > > On Tue, Jul 15, 2014 at 8:02 PM, Abhi <vyaaghrah-...@yahoo.com> wrote: > >> doesnt look like hardware nothing special on the j-series just pc >> motherboard. Did you check your router is using more memory after upgrade. >> Check the swap space under "run show system process extensive" >> >> regards >> abhijeet.c >> >> >> On Tuesday, July 15, 2014 7:57 PM, thiyagarajan b < >> bn.thiyagara...@gmail.com> wrote: >> >> >> >> Thanks Abhi for your prompt response, I tried rebooting the device twice >> but no positive result, this device was running in junos9.0 and recently >> upgrade to 11.4. Would you suspect any bug or something, or its a hardware >> error.?/... Any suggestions? >> >> Warm Regards, >> Thiyagarajan B. >> >> >> >> On Tue, Jul 15, 2014 at 7:50 PM, Abhi <vyaaghrah-...@yahoo.com> wrote: >> >> on free bsd if i am correct then inetd should be responsible for invoking >> the icmp child task; looks something is wrong in the kernel. >> Any change you did on the device? >> You can try restarting inetd if it permits with root privilege. >> >> >> regards >> abhijeet.c >> >> >> On Tuesday, July 15, 2014 7:40 PM, thiyagarajan b < >> bn.thiyagara...@gmail.com> wrote: >> >> >> >> Hello, >> I am running Junos 11.4R10 in a J2320 router and getting " Could not >> create >> Child process" error message whenever ping is initiated from the router. >> Please help to resolve. >> >> Warm regards, >> Thiyagarajan B. >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> >> >> >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp