Chris, You should actually shape to 500Mbps and not police your traffic... I think this could be a good start: http://www.juniper.net/techpubs/en_US/junose15.1/information-products/topic-collections/qos-configuration/index.html?book-swconfig-qos-configuration.html
Arie On Tue, Jun 2, 2015 at 1:15 PM, Chris Adams <c...@cmadams.net> wrote: > I have used policers on units to limit the traffic for a particular > VLAN, but now I have a need to limit the total traffic on an interface. > I have a gigE link that is telco-limited to 500Mbps (but I need to > police the link so I don't put more than 500M in), with several VLANs > that each need to have their own rate. > > I haven't done that before; what's the best way to do that? > > This is on an MX960. > -- > Chris Adams <c...@cmadams.net> > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp