Colleagues, I have the following configuration on some Cisco switches, e.g.
interface GigabitEthernet0/10 switchport access vlan XXX switchport mode access mls qos cos 6 mls qos cos override ! How do I do the same on a Juniper EX4200 switch, namely force a 802.1p CoS value on all ingress frames incoming via a certain access port and keep this value when these frames leave the EX4200 switch via a trunk port? I don't need to modify Juniper queues or anything sophisticated. I just need to classify frames and pass the classified frames to the communications equipment which understands CoS bits. Thank you in advance for any input. -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:suda...@sibptus.tomsk.ru _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp