Hi all, I have an IFL on a 10G interface configured with a traffic-control-profile that has a 10M shaper and references a scheduler-map with 5 queues. The platform is MX960 with MPC2E-3D-Q linecard.
I would like to find out the per-queue buffer sizes as configured on the PFE in bytes. Is there a command to show that? I know I could work it out but if there is a command to show it and I can be lazy then I'm all for that :) If I delve into the PFE I can look at the scheduler hierarchy for the IFL (hopefully the formatting keeps): NPC0(pe1-RE0 vty)# show cos scheduler-hierarchy <--snip--> class-of-service egress scheduler hierarchy - rates in kbps --------------------------------------------------------------------------------- shaping guarntd delaybf excess interface name index rate rate rate rate other ---------------------------- ----- ------- ------- ------- ------- ------------- xe-0/0/1 164 0 0 0 0 xe-0/0/1.2000 329 10000 0 0 0 q 1 - pri 0/0 37272 0 24% 24% 0% q 2 - pri 0/0 37272 0 2% 2% 0% q 3 - pri 2/0 37272 0 1% 5% 0% q 4 - pri 0/0 37272 0 24% 24% 0% q 5 - pri 3/0 37272 0 24% 5000 0% exact xe-0/0/1.32767 429 0 2000 2000 0 q 0 - pri 0/1 2 0 95% 95% 0% q 3 - pri 0/1 2 0 5% 5% 0% But that doesn't give me the buffer sizes in bytes, only as it's configured in the config. If I look closer at the IFL specifically I get: NPC0(pe1-RE0 vty)# show cos halp ifl 329 IFL type: Basic -------------------------------------------------------------------------------- IFL name: (xe-0/0/1.2000, xe-0/0/1) (Index 329, IFD Index 164) QX chip id: 0 QX chip dummy L2 index: 4 QX chip Scheduler: 4 QX chip L3 index: 4 QX chip base Q index: 32 Number of queues: 8 Queue State Max Guaranteed Burst Weight Priorities Drop-Rules Index rate rate size G E Wred Tail ------ ----------- ----------- ------------ ------- ------ ---------- ---------- 32 Configured 10000000 0 131072 1 GL EL 0 255 33 Configured 10000000 0 131072 320 GL EL 4 10 34 Configured 10000000 0 131072 26 GL EL 4 2 35 Configured 10000000 0 131072 13 GM EL 4 131 36 Configured 10000000 0 131072 320 GL EL 4 10 37 Configured 10000000 2400000 131072 320 GH EH 4 193 38 Configured 10000000 0 131072 1 GL EL 0 255 39 Configured 10000000 0 131072 1 GL EL 0 255 Rate limit info: Q 5: Bandwidth = 2400000, Burst size = 73536. Policer NH: 0x3077af9a0003c000 Index NH: 0xda4be18996801006 That shows me the burst size in bytes but that is for the overall egress 10M shaper I assume. So I wonder if there is something that will show me it on a per-queue basis? Thanks, Dan _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp