Juniper documentation states the below on the Redundant Logical Tunnels overview
"Note: You can decrease the time it takes for failure detection and failover to occur. Configure the enhanced-ip statement at the [edit chassis network-services] hierarchy level to enable Packet Forwarding Engine liveliness detection." http://www.juniper.net/techpubs/en_US/junos13.3/topics/concept/tunnel-redundant-overview.html I cannot locate any detail other than on this one page supporting the fact that by transitioning the MX with MPC cards into enhanced-ip mode it will improve rlt failover etc. Can anyone provide more information on enhanced-ip and redundancy ? Ian _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
