Thanks everyone. I ended up ordering the newer version of the Transcend 8gb SLC, will report back with photos.
Original Message From: Markus Sent: Saturday, July 25, 2015 9:25 AM To: Tom Storey Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Replacement HD/SSD for RE-850 Am 25.07.2015 um 10:42 schrieb Tom Storey: > I wonder if some double sided tape would suffice to hold it in place > until it needed to be replaced? I doubt it, and IMHO, it's not necessary. When you plug the HDD into the connector, the tail of the HDD will lift up, just like on the picture. And that's the final position. It's tight, it doesn't move. Nothing else to do there. Just to be clear: I've been running a RE like this for some years now, no problems. It's a SSD after all, you could plug it in upside down if you wanted. And unless you move your router twice a day for several years it won't come loose. Or just use a SSD that fits better. :) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp