Hi In the second case if instead of hitting enter after the normal shutdown you power off and then power on, which is the reason you get?
Greetings Il 14/Ago/2015 07:30, "MSusiva" <ssiva1...@gmail.com> ha scritto: > 1) Last reboot reason 0x1:power cycle/failure > > [Answer] This could be due to unexpected power failure or power loss to RE. > > 2) Last reboot reason Router rebooted after a normal > shutdown. > > [Answer] This reason is shown when a reboot is requested using a cli > command. > > > When command "request system halt" is executed, the RE is halted and > reboot reason is recorded as normal shutdown as you see below: > > "Mar 16 04:27:48 Waiting (max 60 seconds) for system process `vnlru_mem' > to stop...done > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done > > syncing disks... All buffers synced. > Uptime: 18m37s > recorded reboot as normal shutdown > > The operating system has halted. > Please press any key to reboot." > > > After this event, if you hit enter the RE is rebooted and reboot reason is > shown as "normal shutdown". > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp