Hi Everybody When I try to establish L2VPN connection between ASR920 and Juniper M320, I have this output on ASR920:
ASR920#show mpls l2transport vc detail Local interface: Gi0/0/4 up, line protocol up, Eth VLAN 810 up Destination address: 10.234.233.29, VC ID: 2631, VC status: down Last error: Imposition VLAN rewrite capability mismatch with peer I am using different VLANs on both side: ASR920: VLAN 810 Juniper M320: VLAN 2631 This is configuration on ASR side: interface GigabitEthernet0/0/4 no ip address media-type auto-select negotiation auto service instance 1 ethernet encapsulation dot1q 810 rewrite ingress tag pop 1 symmetric xconnect 10.234.233.29 2631 encapsulation mpls this is configuration on Juniper M320 set interfaces xe-1/0/0 unit 2631 encapsulation vlan-ccc set interfaces xe-1/0/0 unit 2631 vlan-tags outer 3012 set interfaces xe-1/0/0 unit 2631 vlan-tags inner 2631 set interfaces xe-1/0/0 unit 2631 input-vlan-map pop set interfaces xe-1/0/0 unit 2631 output-vlan-map push set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631 virtual-circuit-id 2631 set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631 no-control-word set protocols l2circuit neighbor 10.241.252.91 interface xe-1/0/0.2631 mtu 1500 Do you have any idea what is the issue? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp