This did cross my mind, but those routers are in remote locations and this would require fairly long maintenance window. I hope that someone either has the install-media-8.5R4.3-domestic image or there is a way to build disk-image from jinstall-8.5R4.3-domestic-signed.tgz which I have. I guess an older install-image would work as well and then I could upgrade to 8.5R4.3 with jinstall-8.5R4.3-domestic-signed.tgz.
Martin On 9/23/15, Dave Bell <m...@geordish.org> wrote: > Not the best solution, but have you thought about taking your live > routers down for maintenance, and dd'ing the contents of the CF onto > another card? > > Regards, > Dave > > On 23 September 2015 at 13:10, Martin T <m4rtn...@gmail.com> wrote: >> Or maybe someone has install-media-8.5R4.3-domestic image on some old >> tape-drive and is willing to share it? :) >> >> >> thanks, >> Martin >> >> On 9/21/15, Martin T <m4rtn...@gmail.com> wrote: >>> Hi, >>> >>> I have one RE-600-2048(256MB CF and 40GB HDD) and one RE-333-768(256MB >>> CF and 40GB HDD) routing engine. Both are with blank CF and HDD. I >>> would like to install Junos 8.5R4.3 on those routing engines and use >>> those as spares for some old routers with the same routing-engines and >>> software, but I cant find the install media for such legacy software >>> release. Oldest one available from Juniper web site for M series seems >>> to be 12.3R1.7(install-media-12.3R1.7-domestic), but I need >>> install-media-8.5R4.3-domestic. Is there a way to download EOL Junos >>> releases from Juniper web-site? Or is there a way to build >>> install-image from jinstall >>> tarball(jinstall-8.5R4.3-domestic-signed.tgz)? >>> >>> >>> thanks, >>> Martin >>> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp