On 13/Oct/15 15:04, Chad Levy wrote:
> Hi Mark, > > The default gateway of the machine is the EX4500. > > I have since tried another scenario. If I place both ISPs on the same > MX80, and the same asymmetric route exists on the ingress and egress, > there is no longer an issue with connectivity. I only have an issue > when the ingress and egress paths traverse different MX80 devices. I have a suspicion that the routes you are receiving from either provider are not equal. A couple of solutions I'd try: 1. Keep the switch Layer 2 only. Run VRRP on the MX80's and point the PC to the VIP address for the default gateway. 2. Keep Layer 3 on the switch, but have a default route pointing to your providers on each upstream on each MX80. For 2), above, I assume each MX80 already has the /30 route covering the PC (via OSPF, you mentioned, yes?)... Mark. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp