Dear James,
You can use LFM to detect errors on the link
Edit protocols oam
ethernet {
link-fault-management {
action-profile detect-loss {
event {
link-adjacency-loss;
protocol-down;
}
action {
syslog;
link-down;
send-critical-event;
}
}
interface ge-x/x/x {
apply-action-profile detect-loss
pdu-interval 50;
pdu-threshold 3;
however there's no hold-time on LFM to test the link for say 10sec in order to
render it usable again so you might need interface hold down timers for
stability
set int ge0/0/0/ hold-time up 10000 down 0
adam
>
Adam Vitkovsky
IP Engineer
T: 0333 006 5936
E: adam.vitkov...@gamma.co.uk
W: www.gamma.co.uk
This is an email from Gamma Telecom Ltd, trading as “Gamma”. The contents of
this email are confidential to the ordinary user of the email address to which
it was addressed. This email is not intended to create any legal relationship.
No one else may place any reliance upon it, or copy or forward all or any of it
in any form (unless otherwise notified). If you receive this email in error,
please accept our apologies, we would be obliged if you would telephone our
postmaster on +44 (0) 808 178 9652 or email postmas...@gamma.co.uk
Gamma Telecom Limited, a company incorporated in England and Wales, with
limited liability, with registered number 04340834, and whose registered office
is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at
Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.
-----Original Message-----
> From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf
> Of james list
> Sent: Monday, October 19, 2015 3:34 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] Link with errors, how to fast detect ?
>
> Dear experts,
>
> I currently have a wan link between two MXs that sometimes is experiencing
> errors.
>
> I’ve on top of the link OSPF (timer 1/3) as routing protocol and I’d like to
> find
> out any possible way to exclude the link when errors are in place and below
> to the 3 seconds of the OSPF timers.
>
>
> I’ve analyzed the following:
>
> 1) BFD with OSPF but it doesn’t support hold-time (as BGP does), in
> order to avoid OSPF flapping and generate higher instability I cannot use it
>
> 2) RPM event based script: probe interval is currently not below of 1
> second, hence to detect results with no false positive I need some sampling
> and we’re still at 3 seconds or more
>
> Any other possible options ?
>
> OAM ? does it support hold-time ?
>
>
> Cheers
>
> James
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
