Howdy List, I can't seem to get a dynamic-db prefix-list to work correctly on either an ex3200 or ex2200 on JUNOS 12.3 and 12.10. I'm starting to suspect it simply won't work on these models (or maybe on EX-series at all, or maybe only on routing policies).
Using a dynamic-db prefix-list in a filter leads to NO packets passing on the interface it is instantiated on. (tested on l2 and l3 interface filtering). It seems to be a simple implementation (create the same prefix-list name in the normal configuration as the dynamic-db prefix list and tag it 'dynamic-db', then use in a filter), so I'm currently not suspecting myself as the culprit. Combining manual prefixes with the dynamic-db in one prefix-list results in only the manual prefixes being honored, while the dynamic-db ones are still ignored (same as above). Thanks list! Also, here's my configuration's relevant parts: DYNAMIC CONFIGURATION: ======================== policy-options { prefix-list badips { 192.168.75.35/32; 192.168.75.100/32; 192.168.100.251/32; } } STATIC CONFIGURATION: ====================== policy-options { prefix-list badips { dynamic-db; 1.1.1.1/32; } } firewall { family inet { filter blocktest { term block-dy { from { destination-prefix-list { badips; } } then { discard; } } term allow-all-else { then accept; } } } } interfaces { vlan { unit 33 { family inet { filter { input blocktest; } address 192.168.78.1/24; } } } } vlans { noc24-test { vlan-id 33; interface { ge-0/0/3.0; } l3-interface vlan.33; } } Dan Farrell Applied Innovations Corp. d...@appliedi.net _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp