Hi Rajendra, On Tue, Dec 1, 2015 at 5:20 PM, Rajendra Maharjan < rajendra.mahar...@subisu.net.np> wrote: > > Is there any SNMP oid that can return value of CPU temperature rather than RE temperature. I know there is an oid for RE temperature but it would be very beneficial if I could get CPU temperature value too. Searching through juniper docs didn't help me either. We may workout with script too but getting direct OID would be gorgeous. [...]
I don't have an EX Virtual Chassis handy to test these commands on but maybe this helps? dale@ex2200> show snmp mib walk jnxOperatingDescr jnxOperatingDescr.1.1.0.0 jnxOperatingDescr.2.1.1.0 = Power Supply: Power Supply 0 @ 0/0/* jnxOperatingDescr.4.1.1.1 = FAN: Fan 1 @ 0/0/0 jnxOperatingDescr.4.1.1.2 = FAN: Fan 2 @ 0/0/1 jnxOperatingDescr.7.1.0.0 = FPC: EX2200-24T-4G @ 0/*/* jnxOperatingDescr.8.1.1.0 = PIC: 24x 10/100/1000 Base-T @ 0/0/* jnxOperatingDescr.8.1.2.0 = PIC: 4x GE SFP @ 0/1/* jnxOperatingDescr.9.1.0.0 = Routing Engine 0 {master:0} dale@ex2200> show snmp mib walk jnxOperatingTemp jnxOperatingTemp.1.1.0.0 = 0 jnxOperatingTemp.2.1.1.0 = 0 jnxOperatingTemp.4.1.1.1 = 0 jnxOperatingTemp.4.1.1.2 = 0 jnxOperatingTemp.7.1.0.0 = 31 <-- temperature of FPC jnxOperatingTemp.8.1.1.0 = 0 jnxOperatingTemp.8.1.2.0 = 0 jnxOperatingTemp.9.1.0.0 = 31 <-- temperature of RE jnxOperatingTemp.7.1.0.0 == .1.3.6.1.4.1.2636.3.1.13.1.7.7.1.0.0 In a VC, you should see jnxOperatingTemp.7.<memberID+1>.0.0 being populated with the per-FPC temperature value. cheers, Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp