On 21/12/15 15:42, Matthew Crocker wrote:
A ‘show run bgp sum’ bgp.l3vpn.0 with 0 routes
That's what you want to focus on. Check the output of "show bgp nei" to
ensure the inet-vpn-unicast is *actually* present on "NLRI for this
session"; if not then correct this.
Remember if you're using a route-reflector you need to have it setup there.
If the NLRI is present then "show route receive-proto bgp <nei> table
bgp.l3vpn.0 all extensive" to check you're actually getting any routes
but maybe rejecting them.
If there are no routes present, check "show route advertising-protocol
bgp <nei> table VRF.inet.0" at the sending side to check they're
actually being redistributed.
Showing your full BGP config might help.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
