Hi all,
I'm a cisco guy coming into the juniper world. I'm trying to understand all these different interface family and encapsulation options.. And the difference seen between my ACX5048 and my MX104. I'm having trouble comparing this to something I've done in the cisco world. Does anyone have a website link or anything that would help me understand the different uses and scenarios why I would use these ? (junos4ios book has a little bit but not much info). Or perhaps you can explain it to me. I run an MPLS network of Cisco ASR9000's, ME3600's and ASR901's and am embarking on acquiring several ACX5048. I do lots of MPLS L3VPN's and MEF ELINE, ELAN and ETREE services, via manual l2vpn pw's and bgp auto vpls elan's.. also do single and dual tag operations of pushing and popping .so I really need to know what options (encaps and families) I will probably be using for the things I mentioned above. Is there a good book/class for this SP Layer 2 understanding of Junos ? Is the class JSPX (Juniper Service Provider Switching) good for things like this ? ACX5048 gvtc@eng-lab-acx5048-1# set interfaces ge-0/0/0 encapsulation ? Possible completions: ethernet-bridge Ethernet layer-2 bridging ethernet-ccc Ethernet cross-connect ethernet-vpls Ethernet virtual private LAN service flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration vlan-vpls VLAN virtual private LAN service gvtc@eng-lab-acx5048-1# set interfaces ge-0/0/0 unit 0 family ? Possible completions: > ccc Circuit cross-connect parameters > ethernet-switching Ethernet switching parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > vpls Virtual private LAN service parameters MX104 gvtc@eng-lab-mx104-1# set interfaces ge-1/3/2 encapsulation ? Possible completions: ethernet-bridge Ethernet layer-2 bridging ethernet-ccc Ethernet cross-connect ethernet-tcc Ethernet translational cross-connect ethernet-vpls Ethernet virtual private LAN service extended-vlan-bridge VLAN layer-2 bridging extended-vlan-ccc Nonstandard TPID tagging for a cross-connect extended-vlan-tcc 802.1q tagging for a translational cross-connect extended-vlan-vpls Extended VLAN virtual private LAN service flexible-ethernet-services Allows per-unit Ethernet encapsulation configuration vlan-ccc 802.1q tagging for a cross-connect vlan-vci-ccc CCC for VLAN Q-in-Q and ATM VPI/VCI interworking vlan-vpls VLAN virtual private LAN service [edit] gvtc@eng-lab-mx104-1# set interfaces ge-1/3/2 unit 0 family ? Possible completions: > bridge Layer-2 bridging parameters > ccc Circuit cross-connect parameters > inet IPv4 parameters > inet6 IPv6 protocol parameters > iso OSI ISO protocol parameters > mpls MPLS protocol parameters > pppoe PPP over Ethernet underlying interface-specific options > tcc Translational cross-connect parameters > vpls Virtual private LAN service parameters [edit] Thanks, Aaron _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp