Hi Giuliano, I'm new to Juniper and learning as I go....but I'll at least show you what is in my lab. I have a functioning vpls routing-instance that is working with ... ACX5048, MX104, Cisco ASR9006, Cisco ME3600...
My acx5048 looks like this... here's some bits from the config... gvtc@eng-lab-acx5048-1> show version fpc0: -------------------------------------------------------------------------- Hostname: eng-lab-acx5048-1 Model: acx5048 Junos: 15.1X54-D20.7 set interfaces ge-0/0/1 speed 100m set interfaces ge-0/0/1 encapsulation ethernet-vpls set interfaces ge-0/0/1 unit 0 family vpls (not shown here is the required, IGP (ospf), MPLS, ldp... that was simple) set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 10.101.12.245 set protocols bgp group ibgp family inet-vpn unicast set protocols bgp group ibgp family l2vpn auto-discovery-only set protocols bgp group ibgp neighbor 10.101.0.254 local-as 64512 gvtc@eng-lab-acx5048-1> show configuration | display set | match "routing-instances vlan100" set routing-instances vlan100 instance-type vpls set routing-instances vlan100 interface ge-0/0/1.0 set routing-instances vlan100 route-distinguisher 10.101.12.245:32768 set routing-instances vlan100 l2vpn-id l2vpn-id:65535:10100 set routing-instances vlan100 vrf-target target:65535:10100 set routing-instances vlan100 protocols vpls no-tunnel-services gvtc@eng-lab-acx5048-1> show vpls connections brief Layer-2 VPN connections: .... Instance: vlan100 L2vpn-id: 65535:10100 Local-id: 10.101.12.245 Remote-id Type St Time last up # Up trans 10.101.0.254 rmt Up Feb 5 05:59:29 2016 1 10.101.12.246 rmt Up Feb 5 05:59:29 2016 1 10.101.12.248 rmt Up Feb 5 05:59:29 2016 1 10.101.12.250 rmt Up Feb 5 05:59:29 2016 1 10.101.12.251 rmt Up Feb 5 05:59:29 2016 1 Aaron -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Giuliano Medalha Sent: Thursday, February 4, 2016 9:17 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Acx5048 vpls vlan-id People We are trying to configure vpls routing-instance in a ACX5048 box But the following command does not work after commit ... Routing-instances { VPLS-1 { instance-type vpls; ## ## Warning: statement ignored: unsupported platform (acx5048) ## vlan-id all; ## ## Warning: vlan-id-range is specified for this logical interface; 'vlan-id all' should also be enabled ## interface ae0.50; route-distinguisher .... Is there another way to configure this feature ? Because on MX works OK and it is pretty simple Thanks a lot Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp