Not enough power to power up the card? show chassis power
On Fri, Feb 26, 2016 at 01:50:44PM -0600, Josh Reynolds wrote: > Hi all. > > Pair of MS-MPC-128's. 1st card boots, second card doesn't. Swapped FPC > locations, now the 2nd card boots in the first card's spot, but the > 1st card won't boot in the previous spot of the 2nd card. Have tried > several other slots for the 2nd card the with same results. > > show chassis hardware recognizes the MS-MPC-128 is installed, but no > power. request chassis fpc online slot X shows: "Online initiated, use > "show chassis fpc" to verify", but "show chassis fpc" still shows it's > powered off. > > What gives? > > Thanks _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
