I have no idea if you can use 1G optics in this card, but if you can, you likely want to configure the interface as ge-0/0/0, instead of xe. This is how it works on the EX4200 with the SFP+ module.
Regards, Dave On 26 April 2016 at 20:23, Dave Peters - Terabit Systems < d...@terabitsystems.com> wrote: > Hi all-- > > Stupid question, here. Can the MPC-3D-16XGE-SFPP run with 1G optics (e.g. > EX-SFP-1GE-SX), and if so, is there a specific port setting I need to > commit? I'm running an MX480 with 13.3R8.7, and Uncle Google hasn't been > too useful, yet. > > I tried: > > set interfaces xe-0/0/0 auto-negotiate > > inserted the EX-SFP-1GE-SX connected to an outside 1G port, no lights, no > joy. > > Any help is appreciated. > > Thanks much. > > --Dave Peters > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp