Thanks Giuliano, I don't want to waste too much of my time and yours on this if it's not supported... but just was curious what I could get away with here....
It seems like I can add/delete gige ports as virtual-chassis vc ports, but it says "absent" {master:0} agould@eng-lab-5048-1> request virtual-chassis vc-port set pic-slot 0 port 36 Port conversion initiated, use show virtual-chassis vc-port to verify {master:0} agould@eng-lab-5048-1> show virtual-chassis vc-port fpc0: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/36 Configured Absent {master:0} agould@eng-lab-5048-1> request virtual-chassis vc-port delete pic-slot 0 port 36 vc-port successfully deleted {master:0} agould@eng-lab-5048-1> show virtual-chassis vc-port fpc0: -------------------------------------------------------------------------- {master:0} agould@eng-lab-5048-1> agould@eng-lab-5048-1> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis x ACX5048 Pseudo CB 0 Routing Engine 0 BUILTIN BUILTIN ACX5K Routing Engine FPC 0 REV 07 x x ACX5048 CPU BUILTIN BUILTIN FPC CPU PIC 0 BUILTIN BUILTIN 48x10G-6x40G Xcvr 36 NON-JNPR x SFP-T Power Supply 0 REV 04 740-043886 x JPSU-650W-DC-AFO Power Supply 1 REV 04 740-043886 x JPSU-650W-DC-AFO Fan Tray 0 ACX5K Fan Tray 0, Front to Back Airflow - AFO Fan Tray 1 ACX5K Fan Tray 1, Front to Back Airflow - AFO Fan Tray 2 ACX5K Fan Tray 2, Front to Back Airflow - AFO Fan Tray 3 ACX5K Fan Tray 3, Front to Back Airflow - AFO Fan Tray 4 ACX5K Fan Tray 4, Front to Back Airflow - AFO {master:0} - Aaron p.s. this doesn't seem to work either.... agould@eng-lab-5048-1> request virtual-chassis vc-port set interface ge-0/0/36 error: Interface ge-0/0/36 is not a virtual chassis interface _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp