Hello,
Do You have "set routing-options router-id <lo0.0 primary IPv4 @>" line
in Your config?
Thanks
Alex
On 08/08/2016 12:58, Mohammad Salbad wrote:
Hi experts
I have mx and acx routers both running isis and rsvp and I have mpls lsp
configured between their loopbacks.
when trying to establish ldp and l2circuits it does not work and when I do
show ldp neighbor details from both sided it gives me trasport address
0.0.0.0
noting that I have almost similar setup in my lab and it is working!
any ideas what could make the transport address to be 0.0.0.0 while the
neighbor address is ok?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
