Hey Valentini, Yes you should worry, and no, I don't believe there is discrepancy, the OK just means it's operational, temperatures are not reflected there.
Start by inspecting the fans and filters. If that fails, JTAC. On 28 November 2016 at 10:34, Valentini, Lucio <lucio.valent...@siag.it> wrote: > Hi folks, > Has any of you ever come across this issue? > > If I look at the "show chassis environment output", everything seems to be > OK, but when I look at the more common "show system alarms" , it tells me the > temp is too high. > > Should I worry or can we keep going ? and if so, for how long ? is that > perhaps a bug fixed in later versions? I am using ver. 12.3R3.4. > > > user@switch> show chassis environment > Class Item Status Measurement > Power FPC 0 Power Supply 0 OK > FPC 0 Power Supply 1 OK > Temp FPC 0 CPU OK 51 degrees C / 123 degrees F > FPC 0 EX-PFE1 OK 69 degrees C / 156 degrees F > FPC 0 EX-PFE2 OK 91 degrees C / 195 degrees F > FPC 0 EX-PFE3 OK 68 degrees C / 154 degrees F > FPC 0 GEPHY Front Left OK 44 degrees C / 111 degrees F > FPC 0 GEPHY Front Middle OK 48 degrees C / 118 degrees F > FPC 0 GEPHY Front Right OK 50 degrees C / 122 degrees F > FPC 0 Uplink Conn OK 50 degrees C / 122 degrees F > Fans FPC 0 Fan 1 OK Spinning at full speed > FPC 0 Fan 2 OK Spinning at full speed > FPC 0 Fan 3 OK Spinning at full speed > > > user@switch > show system alarms > 1 alarms currently active > Alarm time Class Description > 2016-11-22 18:36:43 CET Minor FPC 0 EX-PFE2 Temp Too Warm > > user@switch > show version > fpc0: > -------------------------------------------------------------------------- > Hostname: xxx > Model: ex4200-48t > JUNOS Base OS boot [12.3R3.4] > JUNOS Base OS Software Suite [12.3R3.4] > JUNOS Kernel Software Suite [12.3R3.4] > JUNOS Crypto Software Suite [12.3R3.4] > JUNOS Online Documentation [12.3R3.4] > JUNOS Enterprise Software Suite [12.3R3.4] > JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R3.4] > JUNOS Routing Software Suite [12.3R3.4] > JUNOS Web Management [12.3R3.4] > JUNOS FIPS mode utilities [12.3R3.4] > > user@switch > show chassis temperature-thresholds > Fan speed Yellow alarm Red alarm > Fire Shutdown > (degrees C) (degrees C) (degrees C) > (degrees C) > Item Normal High Normal Bad fan Normal Bad fan > Normal > FPC 0 CPU 60 70 80 70 95 85 > FPC 0 EX-PFE1 60 70 80 70 95 85 > FPC 0 EX-PFE2 60 70 80 70 95 85 > FPC 0 EX-PFE3 60 70 80 70 95 85 > FPC 0 GEPHY Front Left 60 70 80 70 95 85 > FPC 0 GEPHY Front Middle 60 70 80 70 95 85 > FPC 0 GEPHY Front Right 60 70 80 70 95 85 > FPC 0 Uplink Conn 60 70 80 70 95 85 > > Is it going to shutdown when the temperature raises above 95 deg C ? > > Thanks > > Best regards > > Ing. Lucio Valentini > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp