On Tue, Nov 29, 2016 at 10:32:15AM +1100, Dale Shaw wrote: > On 29 November 2016 at 08:35, Eduardo Schoedler <lis...@esds.com.br> wrote: > > > > Here on EX2200 I put ip address directly in the vlan. > > > > Try this: > > > > set interfaces vlan unit xxx family inet address 10.x.x.x/24 > > set vlans vlan-RESEAUX l3-interface vlan.xxx > > set interfaces ge-0/x/x unit 0 family ethernet-switching vlan members > > vlan-RESEAUX > > EX4600 runs Enhanced Layer 2 Software (ELS), so it's correct to use "irb.n" > vs. "vlan.n" ...
As of JunOS 13.2X51-D25.. If you run the JTAC suggested 12.3 on this platform it does not yet use ELS... _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp