I’m sending IPFIX flows to Scrutinizer and can generate the type of reports you are looking for. ‘All bandwidth from X ASN’, ect
https://www.plixer.com/products/scrutinizer/ On 12/30/16, 2:16 AM, "juniper-nsp on behalf of Santanu Mandal" <juniper-nsp-boun...@puck.nether.net on behalf of santanumandal2...@gmail.com> wrote: Dear all, I want to measure traffic bandwidth consuming for a specific destination IP from My Orzanization. Say how much is bandwidth is consumed for destination x.x.x.x out of total bandwidth in my ISP link. I have configured S-flow, but there I can see total amount of traffic transfered over a period of time. But My concern is, data transfer rate confumed for this destination, not tootal amount of data. It would be gratfull if you can suggest a tool for this purpose or how to approach to achive this. Thanking you in advance Santanu _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp