I have not done it myself, but here's a guide if you have not seen it: http://www.juniper.net/techpubs/en_US/junos/topics/task/configuration/ptp-gm-clock-acx-series.html
On Tue, Mar 14, 2017 at 5:43 PM, Carsten Pettersson <cars...@petterssons.dk> wrote: > Hi folks, > > I am trying to get an ACX500 to act as PTP master clock, for timing of E1 > over MPLS. > > according to the datasheets: > > https://www.juniper.net/assets/kr/kr/local/pdf/datasheets/1000397-en.pdf > > The ACX500, ACX500-O, and ACX500-O-PoE also provide an integrated GPS > receiver and can act as grandmaster (GM) clock for a distributed PTP > implementation, making them an ideal choice for the aggregation of small cell > traffic when the backhaul is transported over the Internet. > > Does anyone have a succesful configuration for this? I am also struggling to > find information of how to utilise the antenna port on the ACX? > > Any help is appreciated. > > -- > Carsten Pettersson, Senior Network Specialist, IP > www.globalconnect.dk | c...@globalconnect.dk | tel: +45 3125 6595 > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp