On Fri, Aug 11, 2017 at 07:24:32AM +0000, Misak Khachatryan wrote: > Hi, > > we run 15.1R4-S8 on MX-480 with RE-S-1300 and a few DPCE 4x 10GE R and > DPCE 20x 1GE + 2x 10GE R for a while, no problem. We use it as pure > internet border router with bunch of peers and upstreams.
Keep in mind that 14.2 is the last supported software version for RE-S-1300 (TSB16556). Looks like newer versions require more RAM than this RE can hold :( After about a half-year uptime one of our routers with RE-S-1300 and 15.1F5-S1 got into a problem with memory overconsumption: 20:40:05 rpd[3118]: RPD_KRT_Q_RETRIES: Route Update: Cannot allocate memory 20:40:08 kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 5:-1, msg type 2 20:40:13 kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 5:-1, msg type 2 under these conditions ssh/telnet access stopped working, some routes were not installed into FIB and so on... PS: back to subject: can confirm that we got no problems (yet?) running 15.1F5-S1/15.1F7 on DPC. > > Best regards, > Misak Khachatryan, > Network Administration and > Monitoring Department Manager, > > GNC- ALFA CJSC > 1 Khaghaghutyan str., Abovyan, 2201 Armenia > Tel: +374 60 46 99 70 (9670), > Mob.: +374 55 19 98 40 > URL: www.rtarmenia.am > > > On Thu, Aug 10, 2017 at 11:59 AM, john doe <johan.bo...@gmail.com> wrote: > > Hi > > > > Will 15.1 work well on MX boxes with old DPC cards? Anyone running 15.1 on > > MX with DPC? > > > > Johan > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp