CFM is not supported on QFX family. ACX5K supports this feature. Best Regards, Krasi
On 23 October 2017 at 12:39, Vasil Kanev <vasil.ka...@gmail.com> wrote: > Hi there, > > On an QFX5100 VC i`m trying to configure OAM CFM but when i try to check > status i got this: > > error: the ethernet-connectivity-fault-management subsystem is not running > > Here is my config: > > {master:0}[edit protocols oam ethernet connectivity-fault-management] > action-profile LINK_DOWN { > default-actions { > interface-down; > } > } > maintenance-domain lab { > level 7; > name-format character-string; > maintenance-association labMA { > continuity-check { > hold-interval 1; > } > mep 999 { > interface xe-0/0/0.0 vlan 66; > direction down; > auto-discovery; > } > } > } > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp